10Gb Tunable DWDM 80km SFP+ Optical Transceiver Module

10Gb/S Acordabil DWDM 80km SFP+ Optical Transceiver Modul

1 Supports 9.95Gb/s to 11.3Gb/s bit rates

2 Monolitic integrat complet bandă C acordabil transmițător și APD receptor

3 50 GHz ITU canal spațiere cu integrat lungime de undă dulap

4 Up to 80km on 9/125µm SMF

5 instalabil la cald SFP+ amprentă

6 Compatibil cu SFP+ MSA cu LC conector

7 Metal carcasă, for lower EMI

8 conform RoHS și fără plumb

9 Support Digital Diagnostic Monitoring interface

10 Specificații conform cu SFF-8472 V11.3& SFF-8690 V1.4

11 Single +3.3V power supply

12 Carcasă funcționare temperatură

Parte Număr Comandă Informații

1. Absolut Maxim Evaluări

It has to be noted that the operation in excess of any individual absolut maximum ratings might cause permanent damage to this module.

2. General Descriere

HTF'HTSX-DT96-80x tunable transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at signaling rates from 9.95 Gb/s to 11.3 Gb/s. The module complies with the 10 Gigabit Enhanced Small Form Factor Pluggable （SFP+）multisource agreement-MSA（SFF-8431） and SFF{-8432,SFF-8690,SFF 8472. It complies with the ITU-T G.698.1 standard with 50 GHz channel spacing for SONET/SDH, IEEE DWDM 10GBASE-ZR for 80 km reach (Ethernet), and DWDM 10GFC for 80 km reach (Fiber Channel) applications.

The transceiver integrates the receiver and transmitter path on one module. The transceiver contain a C-band-tunable integrated Mach-Zehnder (MZ) laser, enable data transmission over single-mode שּׁ�ber through an industry-standard LC connector. On the receiver side, the 10 G/bps data stream is recovered from an APD/ trans-impedance amplifier, and passed to an output driver. This module features a hot-pluggable electrical interfață.

HTSX-DT96-80x transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines sofisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of A fabrică set normal interval.

The SFP+ MSA definește a 256-}byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1{010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the the originally defined serial ID memory map remains unchanged.

Tag-uri populare: 10GB Tunable DWDM 80KM SFP+ optic transceiver modul% 2c China, producători" 2c furnizori% 2c fabrică% 2c personalizat , cumpara% 2c pret% 2c vrac, compatibil brand